PLEASE READ ALL OF THE FOLLOWING BEFORE PLACING YOUR ORDER!
This kit takes the headache and multiple trips to the parts store out of the equation! We did all the hard work for you so its as simple as a 30 min install!
You will be required to drill 4 new holes in the fenders for the lower mounting brackets using the supplied template, the upper mounting brackets uses the existing hood mounting locations!
Complete Kit Features:
CNC Plasma Cut, CNC Bent
X4 11g P+O steel brackets
X1 18g steel Drill template
X2 Gas Struts
Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts, x4 ball studs, x4 5/16 nuts, x4 5/16 washers )
BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!
Bracket Kit Features:
CNC plasma cut, CNC bent
X4 11g P+O steel brackets
X1 18g steel Drill template
Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts )
BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!
BRACKET KIT DOES NOT INCLUDE GAS STRUTS NOR BALL STUDS!
We recommend 11” extended struts that are at least 40lb capacity per strut
DISCLAIMERS:
THIS KIT MAY REQUIRE RELOCATION OF FACTORY COMPONENTS!!
THIS KIT IS DESIGNED FOR FACTORY STEEL HOODS!! USE ON FIBERGLASS, CARBON FIBER OR OTHER
LIGHT WEIGHT HOODS MAY CAUSE DAMAGE!!
ROHDE FABRICATION DOES NOT WARRANTY GAS STRUTS SUPPLIED WITH OUR KITS!!!
PLEASE READ ALL OF THE FOLLOWING BEFORE PLACING YOUR ORDER!
This kit takes the headache and multiple trips to the parts store out of the equation! We did all the hard work for you so its as simple as a 30 min install!
You will be required to drill 4 new holes in the fenders for the lower mounting brackets using the supplied template, the upper mounting brackets uses the existing hood mounting locations!
Complete Kit Features:
CNC Plasma Cut, CNC Bent
X4 11g P+O steel brackets
X1 18g steel Drill template
X2 Gas Struts
Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts, x4 ball studs, x4 5/16 nuts, x4 5/16 washers )
BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!
Bracket Kit Features:
CNC plasma cut, CNC bent
X4 11g P+O steel brackets
X1 18g steel Drill template
Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts )
BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!
BRACKET KIT DOES NOT INCLUDE GAS STRUTS NOR BALL STUDS!
We recommend 11” extended struts that are at least 40lb capacity per strut
DISCLAIMERS:
THIS KIT MAY REQUIRE RELOCATION OF FACTORY COMPONENTS!!
THIS KIT IS DESIGNED FOR FACTORY STEEL HOODS!! USE ON FIBERGLASS, CARBON FIBER OR OTHER
LIGHT WEIGHT HOODS MAY CAUSE DAMAGE!!
ROHDE FABRICATION DOES NOT WARRANTY GAS STRUTS SUPPLIED WITH OUR KITS!!!
